You are here : Home >> Products >> Supporting Accessories

Water Pump

Raw materials:
Capacity:
50-300m3
Max feeding size:
Application:
mining process
Shipping ports:
Xiamen/Shenzhen/Guangzhou
Delivery:
10-15days
Hot Tags:

Overview

1, IS type single-stage single-suction centrifugal pump according to international standard ISO2858 specified performance and dimension design, mainly IS composed of pump body, pump cover, impeller, shaft, sealing ring, shaft sleeve and suspension bearing see, etc.

2, IS  type single-stage single-suction centrifugal pump pump body and pump cover parts, from impeller back place subdivision, what say normally namely after the doors open structure. Its advantage is easy to check and maintain, repair without acting pump body, suction line, discharge line and motor, need to remove the extended coupling among connection parts, can exit rotor parts maintenance.


3, pump shell (i.e., pump body and pump cover) constitute a pump studio. Impeller, shaft and rolling bearing for pump rotor. Suspension bearing components supporting the pump rotor part, rolling bearing by pump radial force and axial force.


4, in order to balance the axial force of pump, most of the pump impeller, before and after are equipped with sealing ring, and in the impeller HouGaiBan the balance hole, because some pump axial force is not big, impeller back did not set sealing ring and balance hole.


5, pump axial sealing ring is by the packing gland, packing ring and packing, etc, in order to prevent the air intake or a large number of water leakage. Pump impeller if there is a balance, is equipped with soft packing cavity and impeller inlet are interlinked, such as impeller entrance liquid in the vacuum state, then easily along the shaft sleeve surface intake, so in the packing chamber are equipped with packing ring through the pump cover holes, will pump indoor pressure water lead to packing ring to seal. Pump impeller if not balance hole, because impeller back liquid pressure is greater than atmospheric pressure, therefore does not exist gas leakage problem, so don't pack packing ring.


6, to avoid axis wear, in shaft through the packing chamber with shaft sleeve parts of the protection. Bush and between shaft must have type O ring, in order to prevent along with surface intake or leakage.


7, pump drive way is through the extended elastic coupling and motor coupling, pump rotation direction, from driving end see, for clockwise.

Specifications

Type  Flow Lift head Rotation speed Motor power  Diameter(mm)  Diameter(mm) 
(m3/h) (m) (r/min) (kw) Suction  Outlet
IS100-80-125 100 20 2900 11 100 80
50 5 1450 1.5 100 80
IS100-80-160 100 32 2900 15 100 80
50 8 1450 2.2 100 80
IS100-65-200 100 50 2900 22 100 65
50 12.5 1450 4 100 65
IS100-65-250 100 80 2900 37 100 65
50 20 1450 5.5 100 65
IS100-65-315 100 125 2900 75 100 65
50 32 1450 11 100 65
IS125-100-200 200 50 2900 45 125 100
100 12.5 1450 7.5 125 100
IS125-100-250 200 80 2900 75 125 100
100 20 1450 11 125 100
IS125-100-315 200 125 2900 110 125 100
100 32 1450 15 125 100
IS125-100-400 100 50 1450 30 125 100
IS150-125-250 200 20 1450 18.5 150 125
IS150-125-315 200 32 1450 30 150 125
IS150-125-400 200 50 1450 45 150 125

Client Site

Inquiry

Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size. To become our quality clients will have access to a 2%-10% discount of contract!