Machine à laver le sable
JXSC sand washing machine adopts advanced technology, which has the advantages of washing height, reasonable structure, large output, and less sand loss during sand washing, especially the transmission part is isolated from water and sand, so the failure rate is much lower than the current market sand Washing Machine.
Description of sand washing machine
As a kind of sand making machine, sand washing machine, also known as stone washing machine/ sand cleaning machine, can remove impurities covering the surface of sand and gravel, and destroy the water vapor layer of coated sand to facilitate dehydration, sand washing machine plays a role of efficient sand washing plant. Sand cleaning machine is widely used in the washing, grading and dewatering of materials in sand and gravel, mining, building materials, transportation, chemical, water conservancy and hydropower, concrete mixing stations and other industries.
The sand washing machine is divided into two types: spiral sand washing machine and wheel bucket sand washing machine according to its structure and working principle.
1. The wheel bucket type sand washing machine has a novel sealing structure and a reliable transmission device, has a reasonable structure, large processing capacity, low power consumption, high washing degree, and less sand loss during sand washing. The transmission part of the sand washing machine is isolated from water and sand, and the failure rate is much lower than that of the commonly used sand washing machine on the market. It is an excellent choice for upgrading the domestic sand washing industry.
The working principle of the wheel bucket sand washer: When the bucket sand washer works, the motor rotates slowly through the V-belt, reducer and gear, and the impeller rotates slowly. The gravel has a feed trough into the washing tank and rolls under the impeller. And grinding each other to remove impurities covering the surface of the sand, and at the same time destroying the water vapor layer of the coated sand to facilitate dehydration; at the same time adding water to form a strong water flow, timely removing foreign matter with small impurities and specific gravity, and washing the tank from the overflow port Discharge, complete the cleaning effect. The clean sand is taken away by the blades, and finally, the sand is poured from the rotating impeller into the discharge chute to complete the cleaning of the sand.
2. The spiral sand washing machine has the characteristics of simple structure, stable operation, clean sand washing and high output. It is widely used in construction sites, sand and gravel fields, glass factories, power station stations, concrete prefabricated stones and electrical fields.
The spiral stone washer forms a sedimentation tank in the lower part of the inclined water tank. The spiral head is not inserted into the sedimentation tank. The spiral is rotated by the motor through the deceleration drive, and the cleaning water is fed from the bottom of the sedimentation tank to complete the functions of washing, dehydration and classification. Compared with the traditional spiral sand washing machine, the stone washing machine has almost no wearing parts except the screen mesh during the use process, and the medium fine sand and stone powder have little loss and the service life is long.
JXSC provides a full of sand washing machine applicable to various types of sand, such as silica sand washing machine, aggregate washer, beach sand cleaning machine, gravel wash plant, also do mobile sand washing plant and sand washing machine design.